Tianjin SurfyChem T&D Co.,Ltd.

Online Consultation

+86(0)22-23028938

shane@surfychem.com

SKYPE:cary.chem

Toynol® Foamic 041 Defoamer

Toynol® Foamic 041 Silicone Defoamer

Characteristics

n     Mineral oil defoamer used in water-based   system;

n     Good foam break effect;

n    Lasting antifoaming effect;

n    Without causing surface problems as pinhole   and shrinkage;

n    APEO free

Physical properties

Foamic 041

Item

Data

Appearance

Emulsion liquid

Water-solubility

Dispersing

Non-volatile content

52%

Solvent

Water


Chemical Components

Polydimethylsiloxane   and hydrophobic substances

Recommended   Applications

u  Water-based  coatings

u  Printing   chemicals

u Adhesives   and sealants

u Emulsion   polymerization

u Textile   finishing

u Metal   working fluids

u Water   treatment

Performance   evaluation

1.1   Foam break experiment

(1)   Take 100ml 0.5% foaming solution into 1000ml measuring cylinder, then open air pump to bubble to 1000ml and turn off air pump;

(2)   Take 100 ul defoamer into measuring cylinder and record time of foam   elimination.

1.2   Antifoaming experiment

(1)   Operate as foam break experiment;

(2)   After foam disappearing, bubble once more, record the time the foam increases   up to 1000ml;

(3)   Operate (2) repeatedly and take the average time.  

Scoring   standard of foam break:

Standard

Score

<30s

5

30-60s

4

60-90s

3

90-180s

2

180-300s

1

Other time

0

Scoring   standard of foam inhibition:

Standard

Score

>1800s

5

600-1800s

4

300-600s

3

60-300s

2

<60s

1

Other time

0


Foaming agent preparation

Take 1g foaming agent into 1000ml breaker, then add water to dilute and 

prepare foaming agent solution with 1% active content; Stir10 min and then add water to dilute as 0.5% solution for reservation

 

Operation proposal

1.      Add in each stage in production of   water-based products;

2.      Do not dilute defoamers to avoid influencing defoaming 

property;

3.      If   defoamer appears freezing or layering, it should be melted or mix even at   first;

4.      After adding defoamer, it should be stirred completely to make sure good dispersion of defoamer;

5.      Suggested dosage is 0.2-1%;

6.      Advise gradient test;

 

 041-1.jpg

Picture1 Foam break property comparison of some defoamers 

041-2.jpg

Picture 2Foam break property comparison of some defoamers 

Packaging/storage

25L/plastic drum; 220L/iron drum

As liquid material, this product should be sealed and placed in a dry, cool, 

well-ventilated place at room temperature away from fire source. For any 

other information, please refer to MSDS.

 

All statements, technical information and   recommendations contained herein are based on tests and data which we believe   to be reliable, but the accuracy or completeness thereof is not guaranteed   and no warranty of any kind is made with respect thereto. This manual can not   serve as any legal material.

 


Previous�Toynol® Foamic 031 Defoamer
Next�Toynol® Foamic 042 Defoamer

相关产品